Broken Arrow Spray Foam Insulation Authority logoBroken Arrow Spray Foam Insulation Authority

Spray Foam Insulation

Wall Spray Foam Insulation in Broken Arrow, OK

Wall spray foam insulation for new homes, additions and remodels in Broken Arrow, filling every stud cavity and sealing the air leaks batts miss.

  • ✓Owner-Operated
  • ✓1158 N Birch Ave, Broken Arrow, OK 74012
  • ✓Mon–Fri 8am–6pm, Sat 9am–2pm

New construction keeps moving across south and east Broken Arrow, and wall insulation is where a lot of a home's long-term comfort is decided. Before drywall, every stud bay, top plate, window opening and electrical box can be sealed in one visit.

Fiberglass batts only work when they are cut perfectly around every wire and outlet, which rarely happens on a busy job site. Spray foam fills each cavity completely, seals the gaps where outside air sneaks in, and quiets traffic noise from the Broken Arrow Expressway and Creek Turnpike.

We coordinate with your builder so foam goes in after rough-in inspections and before drywall. Every quote is free and based on your plans or a walkthrough.

Broken Arrow tip

Ask your builder to schedule the insulation inspection right after foam goes in. Open-cell foam is trimmed flush with the studs, so drywall can follow quickly once it passes.

When Wall Spray Foam Makes Sense

  • ✓New homes before drywall
  • ✓Room additions and sunrooms
  • ✓Garage conversions
  • ✓Gut remodels in older north Broken Arrow homes
  • ✓Walls facing busy roads
  • ✓Home offices and media rooms

Open-Cell, Closed-Cell or Flash and Batt

Open-cell foam fills a 2x4 wall for about R-13 and a 2x6 wall for about R-20, with a full air seal and strong sound dampening. It is the value choice for most homes.

Closed-cell foam adds racking strength and moisture resistance at about R-6 to R-7 per inch, making it the thinnest insulation with the highest R-value. Flash and batt uses a thin closed-cell air seal with batts behind it to manage cost.

Wall Spray Foam Insulation Services We Offer

✓New Construction Walls

Foam after rough-in, before drywall.

✓Additions and Remodels

Open walls during renovations.

✓Garage Conversions

Turning a garage into living space.

✓Flash and Batt

Budget-friendly hybrid walls.

✓Sound Control Walls

Quieter bedrooms and offices.

Wall Spray Foam Insulation Cost in Broken Arrow, OK

ProjectTypical RangeWhat Affects It
2x4 walls, open-cell, per 1,000 sq ft of wall$1,600–$2,800Window count and height
2x6 walls, open-cell, per 1,000 sq ft of wall$2,500–$4,400Custom homes
Closed-cell about 2 in, per 1,000 sq ft of wall$2,000–$4,000Higher R per inch
Garage conversion wallsQuoted per projectWall area and prep

Priced from your plans or a walkthrough. Your free quote lists each area.

How It Works

  1. 1

    Plan Review

    We review plans with you and your builder.

  2. 2

    Masking

    Windows, boxes and floors protected.

  3. 3

    Spray and Trim

    Cavities filled and open-cell trimmed flush.

  4. 4

    Ready for Drywall

    Coverage checked and site cleaned.

Helpful Reading

Wall Spray Foam Insulation questions answered for Broken Arrow property owners

Frequently Asked Questions

Wall Spray Foam Insulation FAQs

Straight answers to the questions Broken Arrow-area property owners ask us most. Still unsure? Call for a free consultation.

(918) 317-4833
+ What is the thinnest insulation with the highest R-value?
Among common options, closed-cell spray foam at about R-6 to R-7 per inch packs the most R-value into the least space.
+ Do you run electrical before spray foam insulation?
Yes. Electrical, plumbing and low-voltage wiring should be roughed in and inspected first.
+ Is spray foam better than fiberglass for walls?
Spray foam seals air leaks and fills the cavity completely. Fiberglass costs less but leaves gaps around wires and outlets.
+ What spray foam do professionals use?
Professionals use two-component spray foam applied with a heated rig, not canned foam. Several major manufacturers make it, and installer skill matters more than brand.
+ Can you spray foam existing walls?
Spray foam needs open walls. Existing walls can be filled with injection foam or dense-pack insulation.
+ How long does wall foam take?
Most new homes take one to two days for walls.

Business hours, Mon–Fri 8am–6pm, Sat 9am–2pm

Ready for a Free Spray Foam Estimate?

Talk to a locally owned spray foam insulation contractor in Broken Arrow. Get a free estimate and a written quote before any work begins.

Call now Get a Free Quote